Boron (B)

  • Hafnium Boride (HfB2) Sputtering Targets
    Hafnium diboride is an ultrahigh temperature ceramic composed of hafnium and boron. It has a melting temperature of about 3250 degrees Celsius. It is an unusual ceramic, having relatively high thermal and electrical conductivities, properties it shares with isostructural titanium diboride and zircon
  • Iron Boride (FeB) Sputtering Targets
    Iron boride refers to various inorganic compounds with the formula FexBy. Two main iron borides are FeB and Fe2B. Some iron borides possess useful properties such as magnetism, electrical conductivity, corrosion resistance and extreme hardness. Some iron borides have found use as hardening coatings
  • Lanthanum Hexaboride (LaB6)
    Lanthanum Hexaboride (LaB6, also called lanthanum boride and LaB6) is an inorganic chemical. With melting point 2528 K, LaB6 is a refractory ceramic material, which is insoluble in water or hydrochloric acid and very stable in vacuum. Stoichiometric samples are colored intense purple-violet, while b
  • NdFeB Magnets Materials
    Introduction :Neodymium Magnets, also known as NdFeB, NIB, or Neo magnets, are the most widely-used type of rare earth magnets. It is the strongest type of permanent magnet made from an alloy of Neodymium, Iron, and Boron with the Nd2Fe14B tetragonal crystalline structure. It has replaced other ty
  • Niobium Carbide (NbC) Sputtering Targets
    Niobium carbide (NbC and Nb2C) is an extremely hard refractory ceramic material, commercially used in tool bits for cutting tools. It is usually processed by sintering and is a frequent additive as grain growth inhibitor in cemented carbides. It has the appearance of a brown-gray metallic powder wit
  • Titanium Boride (TiB2) Sputtering Targets
    TiB2 i s an extremely hard ceramic which has excellent heat conductivity, oxidation stability and resistance to mechanical erosion . TiB 2 is also a reasonable electrical conductor, so it can be used as a cathode material in aluminium smelting and can be shaped by electrical discharge machining . Ti
  • Zirconium Boride (ZrB2) Sputtering Targets
    Zirconium diboride (ZrB2) is a highly covalent refractory ceramic material with a hexagonal crystal structure. ZrB2 is an ultra high temperature ceramic (UHTC) with a melting point of 3246 C . This along with its relatively low density of ~6.09 g/cm3 (measured density may be higher due to hafnium im
  • Zirconium Boride Powder
    Description A light grey metallic powder, chemically attacked very little by cold HCl, more rapidly by HNO3, and is dissolved by aqua regia. It reacts with H2SO4 and is readily attacked by fused alkali hydroxides, carbonates and disulfides. Produced by various processes. ZrB2, a hard, toxic, gray po
  •