Molybdenum Bar

Description:

Molybdenum is gray-metallic and has the third highest melting point of any element next to tungsten and tantalum. It is found in various oxidation states in minerals but does not occur naturally as a free metal. Molybdenum allows readily form hard and stable carbides. For this reason, Molybdenum is frequently used for making steel alloys, high strength alloys, and superalloys. Molybdenum compounds usually have a low solubility in water. Industrially, they are used in high-pressure and high-temperature applications such as pigments and catalysts.

Standard: ASTM B387
Material: Mo-1, Mo-2, >99.95%
Density: 9.8~10.20g/cc

Application:

Molybdenum bar is mainly used in drawing thin molybdenum wire, producing molybdenum electrode and steel-making additives. Meanwhile, molybdenum bar is also widely used in the furnace industry for radiation screens, elements, and sintering trays.

Specification:

Molybdenum round bar is manufactured as random length pieces or cut to customers’ desired lengths in diameters ranging from 0.080 inches to 6.00 inches. Please view Molybdenum Rod to see our standard sizes of round bar. Below are most of the standard sizes of our molybdenum rectangular bars. If you do not see the size of molybdenum bar that you require, please feel free to contact us.

Width	Thickness	Length	Length Tolerance
15mm	15mm	600mm	+1mm, -0
20mm	20mm	1000mm	+1mm, -0
45mm	45mm	1200mm	+2mm, -0
60mm	60mm	1500mm	+3mm, -0

Surface treatment:

Black Surface – Surface is “as swaged” or “as drawn”; retaining a coating of processing lubricants and oxides.
Cleaned Surface – Surface is chemically cleaned to remove all lubricants and oxides.
Machined or polished Surface – Surface is machined or polished to remove all coating and to achieve precise control.

Surface condition:

No super-fusion, bubble, flaw, layering, necking down, insertion and scratch etc..

Chemical Composition:

Impurities	≤（%）
Fe	0.005
Ni	0.003
Al	0.002
Si	0.002
Ca	0.002
Mg	0.002
P	0.001
C	0.006
O	0.01
N	0.003