Description:
AEM is a leading global provider of high quality molybdenum rod products. We offer a large range of standard rod diameters ranging from .030″ to over 1.0″ that can be cut to size to customer specified thickness, length and surface finish. We also offer precision machining, threaded rod and gun-drilled molybdenum rod. As with all of our materials, our rod begins as metal powder, pressed into ingots, sintered, and then swaged and drawn down. Our advanced drawing / swaging process enables us to tailor the product to meet specific customer material and performance requirements to ensure optimal performance in your application.
Standard: ASTM B387
Material: Mo-1, Mo-2, >99.95%
Density: 9.8~10.20g/cc
Application:
Molybdenum rod can be stretched into molybdenum wire, molybdenum electrode and it also can be applied to steel-making additives, Electric vacuum parts, gas pipes, lead-wire, pole, side bar, daily-use glass, optical glass, insulation material and glass fiber.
Specification:
Molybdenum rod is manufactured as random length pieces or cut to customers’ desired lengths in diameters ranging from 0.080 inches to 6.00 inches. Below are most of the standard sizes. If you do not see the size of molybdenum rod that you require, please feel free to contact us.
|
Diameter |
Length |
Diameter Tolerance |
Length Tolerance |
|
0.08″ ~ 0.40″ |
<315″ |
±0.005″ |
+0.08″, -0 |
|
0.40″ ~ 0.80″ |
<118″ |
±0.010″ |
+0.08″, -0 |
|
0.80″ ~ 4.00″ |
<78″ |
±0.015″ |
+0.08″, -0 |
|
>4.00″ |
<40″ |
±0.025″ |
+0.08″, -0 |
Surface condition:
Black Surface – Surface is “as swaged” or “as drawn”; retaining a coating of processing lubricants and oxides.
Cleaned Surface – Surface is chemically cleaned to remove all lubricants and oxides.
Ground Surface – Surface is center-less ground to remove all coating and to achieve precise diameter control.
Surface treatment:
Surface can be supplied in a shiny, matte, satin, or as-rolled condition, depends upon thickness and width parameters.
Heat treatment:
Molybdenum flat products are rolled and annealed to provide the optimum condition for the desired end use.
Chemical Composition:
|
Element |
Content（%）(no more than) |
|
Mo-1 |
Mo-2 |
|
Fe |
0.005 |
0.02 |
|
Ni |
0.002 |
0.005 |
|
Al |
0.002 |
0.005 |
|
Si |
0.002 |
0.01 |
|
Ca |
0.002 |
0.005 |
|
Mg |
0.001 |
0.003 |
|
P |
0.001 |
0.002 |
|
C |
0.006 |
0.01 |
|
O |
0.006 |
0.08 |
|
N |
0.003 |
－ |
|
Pb |
－ |
0.001 |
|
Bi |
－ |
0.001 |
|
Sn |
－ |
0.001 |
|
Sb |
－ |
0.001 |
|
Cd |
－ |
0.001 |
Data sheet