Rhenium Foil

Description

Rhenium foil is mainly used for chemical vapor phase deposition coating and film(CVD) and physical vapor deposition(PVD) procss, including hot electron beam evaporation, low temperature organic evaporation, atomic layer deposition(ALD) and metal organic chemical vapor deposition product(MOCVD) etc.

Specification

Chemical purity Re 99.99%min(calculated by subtractive method, except gas element), density 21g/cc min

Foil is cut to order and sold by the square inch or square foot.Call or email for additional thicknesses or custom sizes.

Size

T(0.01-20)*W(0.5-500)mm, It can be customized as per requirement.

Typical chemical analysis

Na	0.00%	Ti	0.00%	Cu	0.00%	Sb	0.00%
Mg	0.00%	V	0.00%	Zn	0.00%	Ta	0.00%
Al	0.00%	Cr	0.00%	As	0.00%	W	0.00%
Si	0.00%	Mn	0.00%	Zr	0.00%	Pb	0.00%
P	0.00%	Fe	0.00%	Mo	0.00%	Bi	0.00%
K	0.00%	Co	0.00%	Cd	0.00%	Se	0.00%
Ca	0.00%	Ni	0.00%	Sn	0.00%	Tl	0.00%
o	0.01%	C	0.00%	N	0.00%	H	0.01%

Material	Purity
Rhenium Foil .001”	3N5, 4N
Rhenium Foil .002”	3N5, 4N
Rhenium Foil .003”	3N5, 4N
Rhenium Foil .004”	3N5, 4N
Rhenium Foil .005”	3N5, 4N
Rhenium Foil .006”	3N5, 4N
Rhenium Foil .007”	3N5, 4N
Rhenium Foil .008”	3N5, 4N
Rhenium Foil .009”	3N5, 4N